Frankever Smart Sprinkler Controller 4/6 Zones Automatic Irrigation System

Frankever smart irrigation controller upgrades your water pipes into an intelligent automatic system, which will save you plenty of time that you would have spent watering in the past.

It can control up to 4/6 stations and automatically start and stop irrigating at the specific time you programmed. There are no more dead plants because you forgot to water them, and no more soggy lawns because you forgot to turn the water off.

Welcome to smart watering!
Thank you for purchasing a WiFi-enabled smart sprinkler controller from us.
We can see groomed lawns not just in the parks or at the stadiums, but near buildings like hotels, banks, shops, filling stations, and country houses. Many of us like spending time in the backyard, drinking sprightly beverages and enjoying the view of the lawn. But then, what should we do to keep our lawns beautiful and alive, and prevent their drying?
This smart sprinkler controller gives you a smarter way to water , it can be controlled with smartphone from any corner of the world.

Frankever Specializing in smart wifi auto watering irrigation system,  looking for the brand customers of all over the worlds ,  we can make your brand product, package and your own system intergated development customization support

Usage Manual:

1. Select a location
Choose a location near power and away from direct sunlight.
This location should have a good WiFi signal, you can check the signal using a smartphone.
2. Connect valve wires
Strip about 10mm of insulation from each wire, attach one wire from each valve to a “Common”(COM) terminal and the other wires to a numbered terminal(one wire per terminal)

Note: to prevent damage to the controller, connect only one valve to each terminal.

3. Power on the controller
Insert the power connector into the controller’s power port, plug the transformer into a wall outlet.
4. Mount the controller
Secure the bracket into the wall with the included screws and anchors, and then hang
the controller on the bracket.

5. Connect the controller to WiFi
(1) Connect your mobile device to the Wi-Fi network that the controller will connect to. Only 2.4G network is supported.
(2) Press and hold the “Select” button for about 5s and release until the WiFi indicator light is rapidly flashing that indicates the controller is ready to configure.(3) Tap the + button on the top right corner, the nearby devices will pop upautomatically, choose the device you want to set up

(4) Enter the password of the WIFI network that your mobile device connected, then it will start registering the device to the cloud.

(5) Once the device was added successfully, you will be able to remote water your lawn from anywhere.

6. Create a timer /watering schedule
Tap “Timer” on the bottom to creat timer and watering schedule